Merchant Shipping (Survey of Passenger Steamers) Rules
Table of Contents
1 Citation
Part I PASSENGER ACCOMMODATION
2 Application
NUMBER OF PASSENGERS
3 Number of passengers
4 Application to voyagers beyond Home trade limit
5 Voyages within Home trade limit
6 Voyages within Local trade limit
7 Voyages within 30 mile limit
8 Maximum number of passengers allowed
MEASUREMENT OF PASSENGER SPACES
9 Measurements
SPACES WHICH ARE NOT TO BE MEASURED, ETC.
10 Between deck houses
11 Sponsons
12 Overhanging decks
13 Well-decked ships
14 Limitation of length
15 Airing space
16 Deck in relation to Load Line
17 Inefficient erections
18 Minimum height
19 Lower hold
20 Passengers only allowed in measured spaces
21 Cattle on weather deck
22 Lamp room
23 Oil fuel spaces
24 Awnings
25 Height of rails and bulwarks
26 Deduction for cattle and stores, etc.
27 Arrangements when cattle are carried
28 Airing space not required
VENTILATION
29 Ventilation
30 General
31 Ventilation by cowls
32 Ventilation by mechanical systems
LIGHTING
33 Lighting
DOORS AND BOOBY HATCHES
34 Doors and booby hatches
STAIRWAYS
35 Stairways
WATER CLOSETS
36 Water closets
37 Latrines
WASHING PLACES
38 Washing places
FUEL, WATER AND PROVISIONS
39 Provisions
HOSPITAL ACCOMMODATION FOR UNBERTHED AND THIRD CLASS BERTHED PASSENGERS
40 Hospital
41 Medical officer
GALLEYS
42 Galleys
GOODS ON PASSENGER DECKS
43 Goods
DEPARTURE OF PASSENGER SHIPS
44 Procedure before departure
45 Penalties
Part II MANUFACTURE AND TESTING OF MATERIALS OF CONSTRUCTIONGENERAL
46 Materials for construction to conform with requirements of Part
47 Wrought iron, mild steel plates and sections for hulls
48 Selection and treatment of test-pieces
STANDARD TEST-PIECES
49 Standard tensile test-pieces
50 Bending test-pieces
51 Duplicate tests
52 Stamping of material
53 Freedom from defects, etc.
GENERAL REQUIREMENTS FOR BOILER STEEL
54 Process of manufacture
BOILER PLATES
55 Number and nature of tests
56 Tensile tests
57 Bending tests
58 Annealing
ANGLE, RIVET AND STAY BARS
59 Number and nature of tests
60 Tensile tests
61 Bending tests
62 Tests for rivets
WROUGHT IRON FOR COMBUSTION CHAMBER STAYS
63 Number and nature of tests
64 Tensile tests
65 Bending tests
BOILER TUBES
66 Solid drawn boiler tubes subject to internal pressure
67 Iron and steel tubes subject to external pressure
STEEL FORGINGS
68 Process of manufacture
69 Number and nature of tests
70 Tensile tests
71 Bending tests
72 Annealing
STEEL CASTINGS
73 Process of manufacture
74 Number and nature of tests
75 Tensile tests
76 Bending tests
77 Tests for side scuttle frames, deadlights and plugs
78 Tests for elbows and valves
79 Annealing
MALLEABLE CAST-IRON
80 Malleable iron castings
81 Tests for side scuttle frames, deadlights and plugs
82 Test for fittings of cast-iron
ORDINARY CAST-IRON
83 Ordinary cast-iron not allowed
SOLID-DRAWN STEEL STEAM AND FEED PIPES
84 Material
85 Number and nature of tests
86 Tensile and bending tests
LAP WELDED STEEL STEAM PIPES
87 Material
88 Tensile and bending tests
89 Tests for welds
LAP WELDED IRON STEAM PIPES
90 Number and nature of tests
91 Tests for welds
ANNEALING OF IRON AND STEEL PIPES
92 Annealing of iron and steel pipes
SOLID DRAWN AIR BOTTLES
93 Material
94 Number and nature of tests
95 Tensile and bending tests
SPECIAL MATERIAL AND MATERIAL MANUFACTURED ABROAD
96 Special quality material
97 Material manufactured abroad
SURVEY
98 Application for survey
99 Submission of plans
100 Posponement of surveys
101 Mode of carrying out surveys
102 Period covered by declaration
103 Special passenger and safety certificate
FIRST SCHEDULE
SECOND SCHEDULE
THIRD SCHEDULE
FOURTH SCHEDULE
Legislative History