Multiple purposes
9.—(1)  Where any land, or any building on or to be erected on any land, is intended to be developed for 2 or more purposes falling within 2 or more Use Groups, the development charge for the development of the land is to be determined in accordance with Part V of the Act and the formulae in rules 3 and 4, but with the following modifications in this rule.
(2)  Where the land, or the building on or to be erected on the land, may be divided into parts, each of which is intended to be used exclusively for any one of the purposes falling within 2 or more Use Groups, Part V of the Act and these Rules apply to each part as if each part was a separate development.
(3)  Where it is impracticable to divide any floor or part of a floor of the building on or to be erected on the land in the manner described in paragraph (2) —
(a)subject to sub-paragraphs (b) and (c), in determining the Development Ceiling properly attributable to the floor or part of a floor, B2 in the formula specified in rule 4(1)(b) is the rate corresponding to both the appropriate geographical sector of the land and the Predominant Use Group of the land;
(b)where the land is zoned in the Master Plan for any purpose set out in the first column of the table in Part 1 of the Third Schedule, in determining the Development Ceiling properly attributable to the floor or part of a floor, B2 in the formula specified in rule 4(1)(b) is to be determined in accordance with the formula set out opposite in the second column of that table corresponding to that purpose; or
(c)where the land is sold or leased by or on behalf of the Government, or by the Urban Redevelopment Authority before 1 January 1983 (whether acting on its own behalf or as an agent for the Housing and Development Board), and the terms and conditions of the sale or lease —
(i)state that the land is to be developed for 2 or more purposes (each called in this rule a specified purpose); and
(ii)state the floor area for each specified purpose,
then, in determining the Development Ceiling properly attributable to the floor or part of a floor, B2 in the formula specified in rule 4(1)(b) is the weighted average of the relevant rates for the specified purposes, calculated according to the amount of floor area for each specified purpose.
(4)  The development charge for written permission to develop the whole land is the aggregate of such of the following as may be applicable:
(a)every development charge attributable to a part referred to in paragraph (2);
(b)every development charge attributable to a floor or part of a floor referred to in paragraph (3).
(5)  For the purposes of paragraph (3)(c) —
(a)where the competent authority is of the opinion that the amount of floor area for a specified purpose is not material having regard to the total floor area of the development on the land, the competent authority may disregard that specified purpose when calculating the weighted average in paragraph (3)(c);
(b)the competent authority must disregard any variation or changes to the terms and conditions of the sale or lease of the land that are agreed on, after the sale or lease of the land, between —
(i)the purchaser or lessee of the land; and
(ii)the vendor or lessor of the land referred to in paragraph (3)(c) which sold or leased the land; and
(c)the competent authority is to treat the amount of floor area for any specified purpose as being a fixed amount, a maximum amount or a minimum amount, depending on what is stated in the terms and conditions of the sale or lease of the land.
(6)  In this rule —
“Predominant Use Group”, in relation to any land, means the Use Group for the purposes (as set out in Part I of the First Schedule) for which are the predominant use permissible under the zoning in the Master Plan for the development of that land;
“relevant rate”, in relation to a specified purpose, means the rate corresponding to both the appropriate geographical sector of the land and the Use Group within which that specified purpose falls.
[S 585/2015 wef 05/10/2015]