Definitions
2.—(1)  In these Rules —
“Agreement” means the United Nations Economic Commission for Europe Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions (formerly known as the Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts) adopted at Geneva on 20th March 1958;
“approval mark” means an approval mark under —
(a)paragraph 5 of Regulation 104 (Uniform Provisions Concerning the Approval of Retro-Reflective Markings for Heavy and Long Vehicles and their Trailers) of Addendum 103 to the Agreement; or
(b)such specifications for retro-reflective markings as the Registrar may approve from time to time;
“rear marking” means a rear marking of the type shown in —
(a)Diagrams 1 to 5 set out in paragraph (A) of Part I of the Schedule; or
(b)Diagrams 7, 8 and 9 set out in paragraph (A) of Part IA of the Schedule;
“side marking” means a side marking of the type shown in —
(a)the diagram set out in paragraph (B) of Part I of the Schedule; or
(b)the diagram set out in paragraph (B) of Part IA of the Schedule.
[S 450/2005 wef 11/07/2005]
(2)  Any reference to a rear marking by a numbered diagram shall be construed —
(a)in rule 3 and Parts II and III of the Schedule, as a reference to the rear marking shown in the diagram in paragraph (A) of Part I of the Schedule bearing the corresponding number; and
(b)in rule 4, as a reference to the rear marking shown in the diagram in paragraph (A) of Part IA of the Schedule bearing the corresponding number.
[S 450/2005 wef 11/07/2005]
(3)  Any reference to a combination of vehicles is a reference to a motor vehicle and any trailer or trailers drawn thereby.