| (a) | by deleting the word “Flexal,” in Category Code 1C351.a.30.; |
| (b) | by deleting the word “Puumala,” in Category Code 1C351.a.31.; |
| (c) | by deleting item 2 of Category Code 1C351.b.; |
| (d) | by deleting item 4 of Category Code 1C351.b.; |
| (e) | by deleting item b (including the Note) of Category Code 2A001; |
| (f) | by deleting item 4 of Category Code 3A001.a.; |
| (g) | by deleting item a of Category Code 3A001.a.5. and substituting the following item:“| a. | Analogue-to-Digital Converters (ADC) having any of the following: |
|
| | 1. | A resolution of 8 bit or more, but less than 10 bit, with an output rate greater than 500 million words per second; |
|
| | 2. | A resolution of 10 bit or more, but less than 12 bit, with an output rate greater than 300 million words per second; |
|
| | 3. | A resolution of 12 bit with an output rate greater than 200 million words per second; |
|
| | 4. | A resolution of more than 12 bit but equal to or less than 14 bit with an output rate greater than 125 million words per second; or |
|
| | 5. | A resolution of more than 14 bit with an output rate greater than 20 million words per second; |
|
|
”; |
|
|
| (h) | by inserting, immediately after the words “37.5 GHz” in Category Code 3A001.b.2.d., the words “and with an average output power greater than 0.1nW”; |
| (i) | by inserting, immediately after the words “43.5 GHz” in Category Code 3A001.b.2.f., the words “and with an average output power greater than 0.1nW”; |
| (j) | by inserting, immediately after the words “43.5 GHz” in Category Code 3A001.b.3.e., the words “and having an average output power greater than 0.1nW”; |
| (k) | by inserting, immediately after the words “37.5 GHz” in Category Code 3A001.b.4.c., the words “and with an average output power greater than 0.1nW”; |
| (l) | by inserting, immediately after the words “43.5 GHz” in Category Code 3A001.b.4.e., the words “and with an average output power greater than 0.1nW”; |
| (m) | by deleting item b (including the Note) of Category Code 3A002; |
| (n) | by deleting item 2 of Category Code 3A002.c. and substituting the following item:“| 2. | “Signal analysers” having a frequency exceeding 70 GHz; |
|
|
”; |
|
|
| (o) | by deleting the words “500 kHz” in Category Code 3A002.c.3. and substituting the words “40 MHz”; |
| (p) | by deleting item 2 of Category Code 3A002.d. and substituting the following item:“| 2. | An output power exceeding 100 mW (20 dBm) anywhere within the synthesised frequency range exceeding 43.5 GHz but not exceeding 70 GHz; |
|
|
”; |
|
|
| (q) | by deleting the word “or” at the end of Category Code 3A002.d.3.d.; |
| (r) | by deleting item e of Category Code 3A002.d.3. and substituting the following item:“| e. | Less than 1 ms for any frequency change exceeding 550 MHz within the synthesised frequency range exceeding 43.5 GHz but not exceeding 56 GHz; |
|
|
”; |
|
|
| (s) | by deleting the words “A maximum synthesised frequency exceeding 3.2 GHz and having all of the following:” in Category Code 3A002.d.4. and substituting the words “A synthesised frequency exceeding 3.2 GHz but not exceeding 70 GHz, and having all of the following:”; |
| (t) | by inserting, immediately after the words “500 kHz” in Category Code 3A002.d.4.b., the word “or”; |
| (u) | by inserting, immediately after item 4 of Category Code 3A002.d., the following item:“| 5. | A maximum synthesized frequency exceeding 70 GHz; |
|
|
”; |
|
|
| (v) | by deleting item e of Category Code 3A002 and substituting the following item:“| e. | Network analysers having any of the following: |
|
| | 1. | Maximum operating frequency exceeding 43.5 GHz and output power exceeding 31.62 mW (15 dBm); or |
|
| | 2. | Maximum operating frequency exceeding 70 GHz; |
|
|
”; |
|
|
| (w) | by deleting the words “180 nm” in Category Code 3B001.d.1. and 2. and substituting in each case the words “65 nm”; |
| (x) | by deleting the words “180 nm” in Category Code 3B001.f.1.b. and substituting the words “95 nm”; |
| (y) | by deleting “0.45” in Category Code 3B001.f.1.b. and substituting “0.35”; |
| (z) | by deleting the words “180 nm” in Category Code 3B001.f.2. and substituting the words “95 nm”; |
| (za) | by deleting item b (including the Note) of Category Code 4A001; |
| (zb) | by deleting “0.75” in Category Code 4A003.b. and substituting “1.5”; |
| (zc) | by deleting “0.1” in Category Code 4D001.b.1. and substituting “0.25”; |
| (zd) | by deleting Category Code 4D003 and the item relating thereto (including the Note); |
| (ze) | by deleting “0.1” in Category Code 4E001.b.1. and substituting “0.25”; |
| (zf) | by deleting item 2 of Category Code 5A001.c. (including the Note but excluding N.B.1 and N.B.2); |
| (zg) | by deleting items 1 (including the Technical Note) and 3 of Category Code 5B001.b.; |
| (zh) | by deleting items 1 (including the Technical Note) and 3 of Category Code 5D001.d.; |
| (zi) | by inserting, at the end of Category Code 5D001.d.2., the word “or”; |
| (zj) | by inserting, immediately after item 4 of Category Code 5E001.b., the following Note:“| Category Code 5E001.b.4. does not apply to “technology” for the “development” of civil cellular radio-communications systems. |
|
”; |
|
|
| (zk) | by deleting the words “15 Gbit/s” in Category Code 5E001.c.1. and substituting the words “50 Gbit/s”; |
| (zl) | by inserting, immediately after the words “ “optical switching” ” in Category Code 5E001.c.3., the words “and having a switching time of less than 1 ms”; |
| (zm) | by inserting, at the end of Category Code 6A008.1.1, the word “or”; |
| (zn) | by deleting items 2 and 3 of Category Code 6A008.l; |
| (zo) | by deleting item 4 of Category Code 7E004.a; and |
| (zp) | by deleting item f of Category Code 8A002. |