(a) | by inserting, immediately after the definition of “Annual Energy Consumption” or “AEC” in paragraph 1, the following definition:“ “Ballast Efficiency”, in relation to a ballast, means the ratio of Plamp to Pinput (the input power of the lamp‑ballast circuit) with possible sensors, network connections and other auxiliary loads disconnected as specified in the test report, expressed in percentage;”; |
|
|
(b) | by inserting, immediately after the definition of “compact fluorescent lamp with integrated ballast” or “CFLi” in paragraph 1, the following definition:“ “compact fluorescent lamp without integrated ballast” or “CFLni” has the same meaning as in Part 2 of the Third Schedule to the Energy Conservation (Prescribed Regulated Goods) Order 2017;”; |
|
|
(c) | by inserting, immediately after the definition of “covered CFLi” in paragraph 1, the following definition:“ “EEI Class B1”, in relation to a non-high frequency ballast, means the minimum Ballast Efficiency required for the ballast to be rated as Class B1 under Table 17 of Commission Regulation (EC) No. 245/2009 of 18 March 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for fluorescent lamps without integrated ballast, for high intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, and repealing Directive 2000/55/EC of the European Parliament and of the Council;”; |
|
|
(d) | by inserting, immediately after the definition of “ISO” in paragraph 1, the following definition:“ “Lamp Efficacy” or “ηlamp” means the ratio of the rated luminous flux, expressed in lumens, ϕ, to the rated Plamp, expressed in Watts;”; |
|
|
(e) | by inserting, immediately after the definition of “LED lamp” in paragraph 1, the following definition:“ “linear, double-capped fluorescent lamp without integrated ballast” or “LFL” has the same meaning as in Part 2 of the Third Schedule to the Energy Conservation (Prescribed Regulated Goods) Order 2017;”; |
|
|
(f) | by deleting item 11 of paragraph 2 and substituting the following item: | | Plamp ≤ 0.24√ϕ +0.0103ϕ”; |
|
|
|
(g) | by inserting, immediately after the words “LED lamp” in the first column of item 14 of paragraph 2, the words “with an Edison screw or a bayonet lamp cap”; |
(h) | by inserting, immediately after item 14 of paragraph 2, the following items: | | (a) | the ratio of luminous flux emitted by the lamp at 2,000 hours to its initial luminous flux is ≥ 0.80; and |
|
(b) | the fraction of the total number of lamps that continue to operate (light output must be at least 50% of its initial luminous flux) at 2,000 hours is ≥ 0.9 |
|
| | | (a) | the ratio of luminous flux emitted by the lamp at 2,000 hours to its initial luminous flux is ≥ 0.80; and |
|
(b) | the fraction of the total number of lamps that continue to operate (light output must be at least 50% of its initial luminous flux) at 2,000 hours is ≥ 0.9 |
|
| | 14C. | LED lamp designed as a direct replacement for CFLni and LFL without requiring any internal modification of the luminaires |
|
| (a) | the ratio of luminous flux emitted by the lamp at 6,000 hours to its initial luminous flux is ≥ 0.80; and |
|
(b) | the fraction of the total number of lamps that continue to operate (light output must be at least 70% of its initial luminous flux) at 6,000 hours is ≥ 0.9”; |
|
|
|
|
(i) | by inserting, immediately after item 16 of paragraph 2, the following item: | “17. | Non-high frequency ballast |
|
| Ballast Efficiency ≥ EEI Class B1”; |
|
|
|
(j) | by deleting sub-paragraph (i) of paragraph 3 and substituting the following sub‑paragraphs:“(i) | for incandescent lamps, CFLi, and LED lamps with an Edison screw or a bayonet lamp cap — | Lamp Power Consumption (Plamp) in Watts |
| | 0.24√ϕ + 0.0103ϕ ≥ Plamp > 0.17 × (0.88√ϕ +0.049ϕ) |
| | Plamp ≤ 0.17 × (0.88√ϕ+0.049ϕ) |
|
|
| (j) | for CFLni, LFL, and LED lamp designed as a direct replacement for CFLni and LFL without requiring any internal modification of the luminaires — | Rated Lamp Efficacy (ηlamp) in Lumen/Watts |
| | | | | | |
”; |
|
|
|
(k) | by deleting sub-paragraphs (ii) and (iii) of paragraph 5(c) and substituting the following sub‑paragraphs: | | | | | | | The luminous flux measurement test must be conducted in accordance with CIE S 025 (2015) |
| | | | | | | | | | (vi) | LED lamp designed as a direct replacement for CFLni and LFL without requiring any internal modification of the luminaires |
|
| | The luminous flux measurement test must be conducted in accordance with CIE S 025 (2015)”; and |
|
|
|
(l) | by inserting, immediately after sub-paragraph (f) of paragraph 5, the following sub‑paragraph: | | | | IEC 62442‑1 (2011) or IEC 62442‑1 (2018)”. |
|
|
|