All that area comprising part of Lots 1288Pt, 3363KPt, 3364NPt, 3365XPt and Lots 1246, 1273 occupied by “CHANGI AIRPORT CARGO TERMINAL COMPLEX – FREE TRADE ZONE” and containing an area of about 487,820 square metres and bounded approximately as follows: 

  
Commencing at a point on easternmost corner of “CHANGI AIRPORT CARGO TERMINAL COMPLEX – FREE TRADE ZONE” which point is 40,701.0 metres North and 46,633.6 metres East of the Survey Department’s origin of coordinates (30,000 metres North, 30,000 metres East), the boundary runs along successive lines of fence of bearings and distances as under: 

  
  
  
  
  
  
  
  
  
  
  
to a point where it meets a line thence along that and other successive lines of bearings and distances as under: 

  
  
  
  
  
  
  
  
  
  
  
to a point where it meets a fence, thence along successive lines of fence of bearings and distances as under: 

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
to a point where it meets a line, thence along the line on a bearing of 203° 01’ for a distance of 118.1 metres to a point where it meets a fence, thence along successive lines of fence of bearings and distances as under: 

  
  
  
  
  
to a point where it meets a line, thence along that and other successive lines of bearings and distances as under: 

  
  
  
  
  
  
  
  
  
  
  
  
to a point where it meets a fence, thence along successive lines of fence of bearings and distances as under: 

  
  
  
  
  
to meet a line, thence along the line of bearing of 286°56’ and distance of 2.0 metres to the corner of a wall, thence along a line of bearing 293°01’ and distance of 90.7 metres which follows closely a series of walls and fence, thence along that and other successive lines of wall of bearings and distances as under: 

  
  
  
  
  
  
  
  
  
  
  
  
  
to a point where it meets a line, thence along that and other successive lines of bearings and distances as under: 

  
  
  
  
  
  
  
to a point where it meets a fence, thence along successive lines of fence of bearings and distances as under: 

  
  
  
  
  
  
  
  
  
  
  
to a point where it meets a line, thence along that and other successive lines of fence of bearings and distances as under: 

  
  
  
  
  
  
  
to a point where it meets a fence, thence along successive lines of fence of bearings and distances as under: 

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
to the point of commencement, which are delineated in Plan V set out in the Second Schedule.”. 
